busy times 
Sunday, December 1, 2019, 18:39
Posted by Anders
I write this from our new home in Kungsbacka (which also happen to be the hometown of lab.gruppen) with the latest addition to the family, my now 5 days old son, i a crib beside me, so it has been busy times but of course there is already a work in progress listening room, it's all about priorities...



Now that there are no wall to wall neighbors to worry about I can stretch the legs a bit and listen at "proper" levels, the kids do not seem to mind, so now I'm looking at getting some new amplifiers, not for SPL reasons as much as sheer curiosity.

Four Lab.Gruppen LAB1600 in good condition would be nice, currently looking around for these, two bridged driving the ROAR15's, one for mid and one for high (some future project teasing), but there are other amplifier candidates as well.

view entry ( 425 views )   |  permalink   |  print article   |   ( 3 / 55722 )

ROAR FCAM and REW. 
Monday, March 4, 2019, 12:31
Posted by Anders
Johannes dropped by the other day to have a listen to the ROAR15's, fortunate for me he also brought along a laptop with REW and a Umic.

These measurements where take a in room, so don't stare yourself blind at the results.

Appreture ROAR15:


Distortion ROAR15:


Complete system, bare in mind that this is a room completely devoid of any form of acoustic treatment.


view entry ( 2718 views )   |  permalink   |  print article   |   ( 3 / 110007 )

just investigating some claims... 
Thursday, February 14, 2019, 21:34
Posted by Anders
I just wanted to understand if I can see the similarity between a ROAR design, simplified description (2. below), and a claim made that it is similar to what is popularly referenced as a "bass cannon", the closest reference to this I could find is the Bose wave canon, see simplified description (3.) below.



I'm sorry to say I cant really see the similarities between them, but it should be said that I may have gotten something wrong here in the case of the bass canon reference, and I'm willing to change my mind if a sufficient explanation should arise.

For reference I also put in a traditional Tapped Pipe (1.) in order to try and explain how this forms one part of the ROAR design, I also attempted to describe the bose acoustimass cannon (4.), what I believe to be a Helmholtz coupled version of (3.)

Again, I may very well be wrong here, it's just a fun exercise, not a thesis, so no claims from my side as to the validity of this :)
view entry ( 488 views )   |  permalink   |  print article   |   ( 3 / 114349 )

ROAR15 at home 
Thursday, October 25, 2018, 16:54
Posted by Anders
Just a quick post of what is going on :)











RTA low level pink noise at the mouth LPF 500Hz (no additional signal processing):





view entry ( 527 views )   |  permalink   |  print article   |   ( 3 / 137277 )

the old and the new 
Sunday, September 9, 2018, 19:25
Posted by Anders
I figured that it was time to modernize my transducer inventory and seeing as I recently sold my Precision Devices pdn.2450's I thought I'd scale down the size a bit in the process.



Unboxing...



That's right, it's a pair of B&C 15SW115.




Just to give an idea of just how tiny these 15SW115 really are...


And that's it, my pdn.2450's waiting to be picked up and the new small 15SW115 taking their place.


The enclosures intended for the 15SW115's are currently being manufactured by a local company, they should be ready for pickup in early November.

Right nOw I cAnnot Reveal what they are (15) ;)

view entry ( 633 views )   |  permalink   |  print article   |   ( 3 / 93905 )


<Back | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next> Last>>