THAM10 TRY4 - 30x45x45cm - very compact 10" tapped horn 
Saturday, February 5, 2011, 18:38
Posted by Anders
THAM10 TRY4 - 30x45x45cm - very compact in other words.

PLEASE NOTE THAT THE FOLLOWING IS A DEVELOPMENT RELEASE ONLY.

Useful response from 50Hz, I'll let the pictures explain the rest.










view entry ( 11681 views )   |  permalink   |  print article   |   ( 3 / 53805 )

Another THAM10 "update" proposal 
Sunday, January 30, 2011, 20:56
Posted by Anders
I was pondering how to perhaps improve upon the THAM TRY 3 proposal and i came up with this :

PLEASE NOTE THAT THE FOLLOWING IS A DEVELOPMENT RELEASE ONLY.



Adding a reflector in the front chamber to reduce possible turbulence, and adding a 12mm distance plate beneath the driver to secure that the cone newer comes in contact with a hard surface, this may also reduce compression risks.
view entry ( 9583 views )   |  permalink   |  print article   |   ( 3 / 41242 )

What if... THAM 410 - 4x10" TH 
Sunday, January 30, 2011, 20:41
Posted by Anders
It's merely a crazy thought, but what if you put four of the THAM10's in one enclosure ?

I belive it would look something like this :



The details remains to be sorted out, as is the simulation, but it seems to amount to a seriously capable design in a format that mimics the usual size of PA bass enclosures.

PLEASE NOTE THAT THE FOLLOWING IS A DEVELOPMENT RELEASE ONLY.
view entry ( 9339 views )   |  permalink   |  print article   |   ( 3 / 41002 )

THAM10 - further thoughts 
Wednesday, January 26, 2011, 22:22
Posted by Anders
Further thoughts regarding the THAM10, almost there...

PLEASE NOTE THAT THE FOLLOWING IS A DEVELOPMENT RELEASE ONLY.

Overview:


Loaded with the B&C 10NDL64 :


Loaded with the B&C 10NW64 :


Loaded with the B&C 10MD26 :


The hornresp input window


All simulations in 2PI, 1W, same box different drivers.

Let's see hoe far we can go with a 300x450x500mm box :)

next up is this, same outer dimensions, different folding :



With some dimensions :


In 2PI loaded with the B&C 10NW64 :


In 0,5PI same driver, rather impressive for it's size :


The input window data :

view entry ( 9452 views )   |  permalink   |  print article   |   ( 3 / 41073 )

THAM10 - first thoughts 
Wednesday, January 26, 2011, 06:54
Posted by Anders
Initial thoughts on the THAM10, not to be taken to seriously, the sims are in 0,5Pi and the tuning is a bit high, impressive response for it's dimensions though (30x45x45cm).

This is a work in progress, and this is just to show you that I'm still active, and perhaps also what I'm thinking of.

PLEASE NOTE THAT THE FOLLOWING IS A DEVELOPMENT RELEASE ONLY.





The driver chosen in this case is th B&C 10PS26, again please note that this is not anything more then a thought and the room for improvement is yet to be explored.

There are better drivers out there, and the sims should be in 2PI, nothing else is valid, so take this with a pinch of salt.
view entry ( 9731 views )   |  permalink   |  print article   |   ( 3 / 20169 )


<<First <Back | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | Next> Last>>